Skip to content
Commercial door hardware, shipped direct from US distributor warehouses
Send a photo, get a quote
  1. Home
  2. Categories
  3. Mortise locks
  4. Lock bodies and fronts

Lock bodies and fronts

Commercial mortise cases share a 2-3/4 inch backset and an 8 x 1-1/4 inch front, but the spacing between lever and cylinder differs between makers, so the same maker's case is the default replacement.

Get a quote on lock bodies and frontsMortise lock vs cylindrical lock: how they differ and what has to match

Everything else on the opening

All categories
BEST Precision Apex rim exit device in satin stainless steelExit devicesPanic bars: rim, vertical rod and mortise, fire rated and alarmedNorton 1601 surface door closer with its arm, aluminum finishDoor closersSurface and floor closers, arms and tracksAccentra Augusta lever cylindrical lock, Grade 1, satin chromeCylindrical locksLever locks by ANSI function, deadbolts, keylessAdams Rite 7400 electric strike with its wiring connector, clear anodizedElectrified hardwareElectric strikes, maglocks, keypad and electrified locksHager ball bearing butt hinge, 4-1/2 by 4-1/2 inch, satin stainless steelHinges and pivotsBall bearing, continuous geared and pivot setsPemko saddle threshold in dark bronze anodized aluminumThresholds and sealsThresholds, gasketing, door bottoms, sweeps, astragalsRockwood flush pull in satin stainless steelDoor accessoriesDoor pulls, push and kick plates, flush boltsAll categoriesEvery category and type on one page