Skip to content
Commercial door hardware, shipped direct from US distributor warehouses
Send a photo, get a quote
  1. Home
  2. Categories
  3. Door closers
  4. Surface closers, Grade 1 and 2

Surface closers, Grade 1 and 2

A surface closer mounts on the door or frame and is the common replacement.

Get a quote on surface closers, Grade 1 and 2Types of door closers and how to choose one

About surface closers, Grade 1 and 2

ANSI/BHMA A156.4 sets three grades, and BHMA states that a Grade 1 closer must pass two million opening and closing cycles on a test door.

Everything else on the opening

All categories
BEST Precision Apex rim exit device in satin stainless steelExit devicesPanic bars: rim, vertical rod and mortise, fire rated and alarmedAccentra Augusta lever cylindrical lock, Grade 1, satin chromeCylindrical locksLever locks by ANSI function, deadbolts, keylessBEST 45H mortise lock case with its lever, satin chromeMortise locksMortise locks, bodies, trim and cylindersAdams Rite 7400 electric strike with its wiring connector, clear anodizedElectrified hardwareElectric strikes, maglocks, keypad and electrified locksHager ball bearing butt hinge, 4-1/2 by 4-1/2 inch, satin stainless steelHinges and pivotsBall bearing, continuous geared and pivot setsPemko saddle threshold in dark bronze anodized aluminumThresholds and sealsThresholds, gasketing, door bottoms, sweeps, astragalsRockwood flush pull in satin stainless steelDoor accessoriesDoor pulls, push and kick plates, flush boltsAll categoriesEvery category and type on one page