Skip to content
Commercial door hardware, shipped direct from US distributor warehouses
Send a photo, get a quote
  1. Home
  2. Categories
  3. Electrified hardware
  4. Electric strikes

Electric strikes

An electric door strike replaces the strike in the frame and releases the latch.

Get a quote on electric strikesFail safe vs fail secure: electric strikes and maglocks

About electric strikes

It has to suit the lock or exit device latch and the frame, and you choose 12 or 24 V DC to match the power supply.

HES electric strikes: which one fits the door?

The lock or exit device already on the door decides it. All four strikes below run on 12 or 24 V DC and are Grade 1 under ANSI/BHMA A156.31, as HES states them; each page lists HES's own documents.

  • HES 1006: cylindrical and mortise locks with a 4-7/8 in strike, a latchbolt up to 3/4 in or a deadbolt up to 1 in; 1-11/16 in deep body; fail secure unless you order the F version.
  • HES 1500: cylindrical and mortise latchbolt locks with a 4-7/8 in strike and no deadbolt; 1-3/8 in deep body; fail secure or fail safe, set on site.
  • HES 1600: cylindrical and mortise locks with a 4-7/8 in strike, a latchbolt up to 3/4 in or a deadbolt up to 1 in; 1-5/8 in deep body; fail secure or fail safe, set on site.
  • HES 9600: rim exit devices with a Pullman latchbolt up to 3/4 in throw; mounts on the face of the frame without cutting it; fail secure or fail safe, set on site; not fire rated.

Fail safe or fail secure, and strike or maglock: the guide

Everything else on the opening

All categories
BEST Precision Apex rim exit device in satin stainless steelExit devicesPanic bars: rim, vertical rod and mortise, fire rated and alarmedNorton 1601 surface door closer with its arm, aluminum finishDoor closersSurface and floor closers, arms and tracksAccentra Augusta lever cylindrical lock, Grade 1, satin chromeCylindrical locksLever locks by ANSI function, deadbolts, keylessBEST 45H mortise lock case with its lever, satin chromeMortise locksMortise locks, bodies, trim and cylindersHager ball bearing butt hinge, 4-1/2 by 4-1/2 inch, satin stainless steelHinges and pivotsBall bearing, continuous geared and pivot setsPemko saddle threshold in dark bronze anodized aluminumThresholds and sealsThresholds, gasketing, door bottoms, sweeps, astragalsRockwood flush pull in satin stainless steelDoor accessoriesDoor pulls, push and kick plates, flush boltsAll categoriesEvery category and type on one page