HES · Electric strikes
HES 9600 Surface Mounted Electric Strike for Rim Exit Devices, Grade 1, 12/24 V DC
The HES 9600 is a surface mounted electric strike for rim exit devices with a Pullman latchbolt up to 3/4 in throw. Its 3/4 in deep stainless steel housing mounts on metal or wood frames without cutting. It runs on 12 or 24 V DC, is set on site for fail secure or fail safe, and is not fire rated.
- 3/4 in Pullman latch
- rim exit devices, surface mounted
- 12 or 24 V DC
- 500 mA at 12 V, 250 mA at 24 V
- Grade 1
- ANSI/BHMA A156.31; UL 294, UL 1034
- Field selectable
- fail secure or fail safe; ships fail secure
Part number 9600-630-LBM, stocked
Priced on request, the same business day.
- Stocked items ship the same or next business day after payment, then arrive in 1 to 4 business days by ground in the lower 48 states. No shipping to Alaska, Hawaii or Puerto Rico.
- Fit and voltage confirmed in writing before anything ships
- No account and no minimum order. Shipping, returns and warranty terms.
Which HES 9600 part number do I need?
Choose the finish, then add a monitor if your access control system needs one: LBM reports the latchbolt, LBSM the latchbolt and the strike. Voltage and fail mode are set on site, so no 9600 part number carries them.
| Part number | Finish | Monitor | UPC | Availability | Price | Request |
|---|---|---|---|---|---|---|
| 9600-630-LBM | 630 satin stainless steel | Latchbolt monitor (LBM) | 740090040851 | Stocked | On request | Get a price |
| 9600-630 | 630 satin stainless steel | None | Stocked | On request | Get a price | |
| 9600-630-LBSM | 630 satin stainless steel | Latchbolt strike monitor (LBSM) | 740090010298 | Stocked | On request | Get a price |
| 9600-BSP | BSP black suede powder | None | Stocked | On request | Get a price | |
| 9600-613 | 613 bronze toned | None | Stocked | On request | Get a price | |
| 9600-613E | 613E dark oxidized satin bronze powder | None | Stocked | On request | Get a price |
Show all 13 part numbers
| Part number | Finish | Monitor | UPC | Availability | Price | Request |
|---|---|---|---|---|---|---|
| 9600-BSP-LBM | BSP black suede powder | Latchbolt monitor (LBM) | Stocked | On request | Get a price | |
| 9600-BSP-LBSM | BSP black suede powder | Latchbolt strike monitor (LBSM) | 740090026275 | Stocked | On request | Get a price |
| 9600-612 | 612 satin bronze | None | Stocked | On request | Get a price | |
| 9600-606 | 606 satin brass | None | Special order | On request | Get a price | |
| 9600-605 | 605 bright brass | None | Special order | On request | Get a price | |
| 9600-629 | 629 bright stainless steel | None | Special order | On request | Get a price | |
| 9600-613-LBM | 613 bronze toned | Latchbolt monitor (LBM) | Special order | On request | Get a price |
Every row is a real HES part number. Prices in US dollars; stocked means a US distributor holds it and it ships the same or next business day after payment.
How the part number is built
Every 9600 part number is built the same way: 9600, then the finish, then any monitor. 9600-630-LBM is the satin stainless steel strike with a latchbolt monitor. Voltage and fail mode are not in the part number, because both are set on site.
Finish
605Bright brass606Satin brass612Satin bronze613Bronze toned613EDark oxidized satin bronze powder629Bright stainless steel630Satin stainless steelBSPBlack suede powder
Monitor
(none)No monitor-LBMLatchbolt monitor: detects when the latchbolt is in a locked state-LBSMLatchbolt strike monitor: detects when the latchbolt and strike are in a locked state
HES fits the monitors at the factory, so a monitor is chosen when you order. Some distributors write the same part without hyphens, as 9600630LBM. Need a configuration that is not in the table, such as a monitored 606 or 629? Send us the part number and we quote it the same business day.
What are the HES 9600 specifications?
The HES 9600 is an ANSI/BHMA A156.31 Grade 1 surface mounted electric strike, 9 in long and 3/4 in deep, that runs on 12 or 24 V DC at 500 mA or 250 mA and is set on site for fail secure or fail safe.
| Works with | Rim exit devices with a Pullman latchbolt up to 3/4 in throw, from most manufacturers (HES) |
|---|---|
| Mounting | Surface mounted on the face of a metal or wood frame, with no cutting of the frame; holes for the screws and wires are drilled, and tapped where needed. Wood screws not included |
| Operating voltage | 12 or 24 V DC, set by the plug-in connector; 12 V and 24 V connectors in the box |
| Current draw | 500 mA at 12 V DC; 250 mA at 24 V DC; continuous duty. Solenoid 24 ohms at 12 V and 96 ohms at 24 V, rated plus or minus 10 percent |
| Fail mode | Field selectable, fail secure or fail safe; ships fail secure |
| Fire rating (manufacturer) | Not fire rated: HES's catalog lists the 9600 as non-fire rated. HES's fire-rated surface strike for the same latch is the 9500 |
All 19 specifications
| Listings | ANSI/BHMA A156.31 Grade 1 (BHMA certified); UL 294; UL 1034 burglary-resistant and suitable for outdoor use; UL 305 panic hardware, as a UL recognized component; ANSI/SDI 250.13 and ASTM E330 certified; Florida Building Code approved, FL# 14307; RoHS |
|---|---|
| Windstorm | Windstorm rated only with the lockdown screw fitted; HES says fail safe mode should not be used in windstorm resistant applications |
| Static strength and endurance | 2,000 lb static strength; 1,000,000 cycles (HES catalog) |
| UL 1034 rating | 1,500 lb static, 70 ft-lb dynamic impact, 250,000 cycles (HES installation instructions) |
| UL 294 performance levels | Destructive attack level I, line security level I, endurance level IV (100,000 cycles), standby power level I. HES notes the monitor options were not evaluated under UL 294 or UL 1034 |
| Size | 9 in long, 1-3/4 in wide, 3/4 in deep |
| Construction | 300 series stainless steel housing with a separate base and decorative cover; internally mounted solenoid; tamper resistant; non-handed |
| Adjustment | Horizontal, locked with 10-32 set screws; optional #10-24 or 10-32 lockdown screw |
| Monitoring (to order) | LBM latchbolt monitor or LBSM latchbolt strike monitor, fitted at the factory |
| Finishes | 605 bright brass, 606 satin brass, 612 satin bronze, 613 bronze toned, 613E dark oxidized satin bronze powder, 629 bright stainless steel, 630 satin stainless steel, BSP black suede powder |
| In the box | Strike body and cover, two 1/4-20 x 1 in mounting screws, #10-32 and #10-24 lockdown screws, #6-32 x 1/4 in cover screws, a 5/64 in hex key and the 12 V and 24 V plug-in connectors. No faceplate is needed and no wood screws are included |
| Warranty | HES SecuriCare, 5 years from shipment for any reason; 10 years when installed with a SMART Pac III (2005M3) |
| Made by | Hanchett Entry Systems, Inc. (HES), an ASSA ABLOY Group company |
From HES's own documents, listed under Documents. Last checked .
Will the HES 9600 fit my door?
The 9600 fits a rim exit device with a Pullman latchbolt up to 3/4 in throw. It fixes to the face of a metal or wood frame without cutting it, and an aluminum frame with a blade stop needs HES's 9000-ASB spacer bracket.
Exit device latch
The 9600 takes a Pullman latchbolt up to 3/4 in throw on a rim exit device, and HES's brochure calls it compatible with most manufacturers. Send us the make and model of the exit device and we confirm the fit in writing before anything ships.
A different latch
HES makes the 9400 for Pullman latches up to 1/2 in throw, the 9700 for SquareBolt-style devices (Corbin Russwin SecureBolt, Accentra SquareBolt) and the 9800 for Adams Rite Starwheel and interlocking devices; it lists the 9600 for Pullman latches only. Ask us for any of them.
Offset deadlatch
On a Corbin Russwin 5000 Series or Accentra 7000 Series (formerly Yale Commercial) device with an offset deadlatch, HES's frame drawing adds a separate alignment line for the deadlatch. Tell us the device and we confirm the fit in writing.
Replacing another strike
HES's compatibility chart names the 9600 as its replacement for the Adams Rite 74R1, RCI 0162 and Trine 4800 strikes, offered as a convenience only: HES refers you to each maker's catalog. Send a photo of the old strike and the exit device.
Frame
Metal or wood. The strike fixes to the face of the frame with no cutting; holes for its screws and wires are drilled, and tapped where needed. Wood screws are not included, and an aluminum frame with a blade stop needs HES's 9000-ASB spacer bracket.
Door gap
HES's 9000-108 and 9000-116 spacer plates, 1/8 in and 1/16 in thick, offset the strike from the frame to suit the gap.
Pair of doors
HES's SMB surface mounting box installs on the inactive door of a pair to take the 9600 for a rim exit device. HES makes it in black only.
Power
A 12 or 24 V DC supply sized for 500 mA at 12 V or 250 mA at 24 V per strike. On an AC supply, HES's 2005M3 SMART Pac III takes AC or DC and converts AC to DC.
Fire-rated door
HES lists the 9600 as not fire rated. Its 9500 takes the same 3/4 in Pullman latch and is listed as 3-hour fire rated in fail secure only. Whether a strike may go on your door is for your AHJ.
Windstorm opening
HES rates the 9600 for windstorm openings only with its lockdown screw fitted, and says fail safe should not be used there. What the opening needs is for your AHJ.
Replacing a failed 9600
Tell us first. HES SecuriCare covers the 9600 for five years from shipment for any reason, including installation error, and we open the claim with the invoice. Past five years, send a photo of the strike and the exit device.
Electrified strikes on doors people exit through, on fire-rated doors and on windstorm-rated openings are covered by building and fire codes. Whether this strike, and which fail mode, may go on your door is decided by your Authority Having Jurisdiction (AHJ). We supply listed hardware and confirm in writing the part number and options you have chosen; we do not decide code compliance.
How do I install and wire the HES 9600?
The HES 9600 fixes to the face of the frame with two 1/4-20 screws 4-1/8 in above and below the latchbolt centerline, runs on 12 or 24 V DC chosen by its plug-in connector, and ships fail secure.
Voltage
Plug in the connector marked 12 VDC or 24 VDC; both come in the box. Without a connector, HES's diagram joins red and violet for positive and black and red/green for negative at 12 V; at 24 V, red is positive, red/green is negative, and violet and black are joined to each other.
Power quality
500 mA at 12 V DC or 250 mA at 24 V DC, continuous duty. HES warns that many supplies run above their rating and that input more than 10 percent over the solenoid rating may cause severe damage, so check the voltage with a multimeter first.
Wire size
Minimum gauge for the round trip: at 12 V, 18 gauge up to 200 ft and 16 gauge from 200 to 400 ft; at 24 V, 22 gauge up to 300 ft and 20 gauge from 300 to 400 ft.
Marking the frame
Mark the latchbolt centerline on the frame. HES's drawing puts the two 1/4-20 mounting holes 4-1/8 in above and below it, 7/8 in from the edge toward the door, with a 3/4 in hole for the power wires and a 1/2 in hole for monitor wires 1-5/16 in either side of it. HES marks the drawing not to scale and recommends its 9000-MTK template kit.
Fail mode
The strike ships fail secure. For fail safe, take out the selector stop pin on each side of the strike body with the 5/64 in hex key, refit both toward the center of the strike and tighten them; on an LBSM strike, move the monitoring switch too. HES says fail safe should not be used in fire rated or windstorm resistant applications.
Adjusting and locking
Fix the strike with the two 1/4-20 x 1 in screws, check the latchbolt against both keepers, and lock any horizontal adjustment with the 10-32 set screws. The optional #10-24 or 10-32 lockdown screw adds security; remove the strike before drilling for it. Without it, HES says the 9600 is not windstorm rated and its windstorm label should come off.
Monitor leads
LBM: white common, orange normally open, green normally closed. LBSM: brown common, blue normally open, yellow normally closed. HES gives these switch states for an unpowered strike with the door open.
Aluminum frame with a blade stop
HES says a 9000-ASB spacer bracket is needed for a secure installation. On a retrofit the exit device may have to move toward the hinge side of the door to suit it, and the lockdown hole then has to be drilled and tapped.
From HES's installation instructions for the 9400 to 9800 strikes (AADSS1053638) and its 9600 catalog page (AADSS1203093), both listed under Documents. Wire to the instructions in the box and to the National Electrical Code (NFPA 70), as HES requires.
What else does the HES 9600 need?
The 9600 needs no faceplate and no frame cutting. These HES parts cover an AC supply, the door gap, an aluminum frame with a blade stop, a pair of doors and marking the frame.
Show all 8 accessories and brackets
| Part number | What it does | When you need it | Request |
|---|---|---|---|
| 9000-MTK | Metal template kit for installing the 9400, 9500, 9600, 9700 and 9800 | Marking the frame; HES's instructions recommend it | Get a price |
| 9000-ASB | 1/2 in aluminum spacer bracket, in 613E, 628E or BSP | An aluminum frame with a blade stop, where HES says it is needed for a secure installation | Get a price |
| 9000-108, 9000-116 | Spacer plates, 1/8 in and 1/16 in, that offset the strike from the frame; in 613E, 628E, 630 or BSP | Suiting the door gap | Get a price |
| SMB | Surface mounting box for the inactive door of a pair, for the 7000 (783S, 789S), 9400, 9500, 9600 and 9700; black only | A pair of doors, with the strike on the inactive door | Get a price |
| 2005M3 | SMART Pac III in-line power controller: takes AC or DC, converts AC to DC, and its continuous duty timer cuts the initial voltage by 25 percent to extend the strike's life | An AC supply; it also extends HES's warranty from 5 to 10 years | Get a price |
| 2001M | Plug-in bridge rectifier: converts AC to unfiltered DC; rated 35 V and 1 A, with an MOV and a self-resetting fuse | Running the strike from an AC supply | Get a price |
| 2004M | ElectroLynx adapter between an HES strike and ElectroLynx plug-in connectors | A door and frame pre-wired with ElectroLynx | Get a price |
| 2006M | Plug-in buzzer: audible operation indicator at 24 V DC, 75 dB at 11-3/4 in | A sound when the strike operates | Get a price |
Part numbers and descriptions from HES's 9600 catalog page and the accessory list on its 9600 product page. We confirm every accessory in writing with the strike.
Customer reviews
No reviews yet for the HES 9600
Reviews come only from buyers of this part, checked against their order, and we publish every one, good or bad.
Bought this part from us? Write a review
We hold a review back only if it is abusive, defamatory or obscene, is not about the part or the order, is clearly fake, or shows someone's personal details, and we apply that test to every review. Nobody is paid or given anything for a review.
Questions about the HES 9600 Series Electric Strike
Which exit devices does the HES 9600 work with?
The HES 9600 works with rim exit devices that have a Pullman latchbolt up to 3/4 in throw, which HES says covers most manufacturers. For a Pullman latch up to 1/2 in throw HES makes the 9400, for SquareBolt-style devices the 9700, and for Adams Rite Starwheel or interlocking devices the 9800. Send us the make and model of your exit device and we confirm the fit in writing.
Is the HES 9600 fail safe or fail secure?
The HES 9600 is both: it is field selectable and ships fail secure, locked when the power is off. Moving its two selector stop pins with the hex key supplied makes it fail safe, unlocked when the power is off. HES says fail safe should not be used in fire rated or windstorm resistant applications. Which mode your door needs is for your Authority Having Jurisdiction (AHJ).
Does the HES 9600 run on 12 V or 24 V?
The HES 9600 runs on both 12 V and 24 V DC: fit the plug-in connector marked 12 VDC or 24 VDC, both in the box. It draws 500 mA at 12 V DC or 250 mA at 24 V DC, continuous duty. HES warns that input more than 10 percent over the rating may cause severe damage, so check the supply with a multimeter first.
Can the HES 9600 go on a fire-rated door?
The HES 9600 carries no fire rating: HES's catalog lists it as non-fire rated. For a fire-rated opening with a Pullman latch rim device, HES makes the 9500, which takes the same 3/4 in latch and is listed as 3-hour fire rated in fail secure only; we can quote it. Whether any strike may go on your door is decided by your local code official, the Authority Having Jurisdiction (AHJ).
What is the difference between the HES 9600, 9600-LBM and 9600-LBSM?
The monitor. The plain 9600 has none. LBM adds a latchbolt monitor, which HES says detects when the latchbolt is in a locked state; LBSM adds a latchbolt strike monitor, which detects when the latchbolt and the strike are both locked. HES fits the monitor at the factory, so choose it when you order.
What is the difference between the HES 9600 and the 9400?
The latch throw. HES makes the 9600 for rim exit devices with a Pullman latchbolt up to 3/4 in throw and the 9400 for those up to 1/2 in. HES also lists the 9600 as windstorm rated, which its selector guide does not show for the 9400. Check the throw in the exit device maker's documents, or send us the make and model and we confirm it.
What warranty does the HES 9600 carry?
The HES 9600 carries HES SecuriCare: five years from shipment for any reason, including installation error, vandalism or force majeure. Installed with a SMART Pac III (2005M3) it is ten years. HES issues a Customer Care Form before anything is returned and may ask for the original invoice, so tell us first and we open the claim.
How do I order the HES 9600?
- 1Choose the part number. From the table above, or send a photo of the exit device, its latch and the frame and we identify what fits.
- 2We confirm it in writing. Exit device and latch, frame, finish, monitor, voltage, fail mode and whether the opening is fire rated or windstorm rated, with the price and the total including shipping, the same business day.
- 3You approve and pay. Prepaid. No account and no minimum order. Unused stock items can be returned within 30 days with a 25 percent restocking fee; installed or wired items and special orders cannot.
- 4It ships direct. From a US distributor warehouse, tracking on every box. Stocked items ship the same or next business day after payment; special-order parts are quoted with their lead time.
Documents: data sheet, templates, installation, certificates
11 documents from HES
Data sheet
Installation
Compatibility
Certificates
Links open HES's own files. Spot something wrong on this page? Email sales@latchfordhardware.com and we check it against the source.
Not sure which 9600 you need?
Send a photo of the door, the frame head and anything already fitted. We tell you which part number fits and what else the door needs, the same business day.
